Skip to main content

Results appear automatically as you type.

DIY Forum
1 / 8

WATCH / LEARN / USE

Videos, Manuals & FAQs

Assembly videos & project resources

Original maker videos and component documentation. Choose the HD1910 mechanical revision; project demonstrations may use electronics supplied separately.

01 Parts overview

Source: 机械行者Robo · Bilibili · 1:32. Copyright belongs to the original creator. Contact us for removal if this infringes your rights. Original video ↗ · Contact us

02 Lower leg assembly

Source: 机械行者Robo · Bilibili · 2:21. Copyright belongs to the original creator. Contact us for removal if this infringes your rights. Original video ↗ · Contact us

03 Upper leg assembly

Source: 机械行者Robo · Bilibili · 5:13. Copyright belongs to the original creator. Contact us for removal if this infringes your rights. Original video ↗ · Contact us

04 Torso assembly

Source: 机械行者Robo · Bilibili · 2:29. Copyright belongs to the original creator. Contact us for removal if this infringes your rights. Original video ↗ · Contact us

05 Neck assembly

Source: 机械行者Robo · Bilibili · 0:40. Copyright belongs to the original creator. Contact us for removal if this infringes your rights. Original video ↗ · Contact us

06 Head assembly

Source: 机械行者Robo · Bilibili · 5:50. Copyright belongs to the original creator. Contact us for removal if this infringes your rights. Original video ↗ · Contact us

OpenMicroDuck HD1910 training demonstration

Source: AI机器人极客 · Bilibili · 0:43. Copyright belongs to the original creator. Contact us for removal if this infringes your rights. Original video ↗ · Contact us

Videos play on this site. Original audio and on-screen text are retained; titles are translated for navigation.

View User Guide
Is this a ready-to-use complete robot?

No. The kit option is mechanical hardware and needs assembly plus a compatible control and power system. Choose individual parts separately when required.

Does every option include 15 servos?

Only the 15-servo kit does. Each other option supplies the selected individual part or part set.

Is a battery or controller included?

They are not listed in the USD400 kit contents. Do not infer included equipment from assembly or development renders.

Can I buy the camera?

Camera reference: OpenMicroDuck uses an IMX219/CSI route. Raspberry Pi Camera Module 2 uses an 8 MP IMX219 sensor (3280 x 2464); Radxa documents this module for ZERO 3. The project BOM also lists 5 MP, conflicting with the manufacturer specification. These references do not identify the unconfirmed camera sold here. Confirm the controller, module part number, ribbon pin count/orientation/pitch and mounting before ordering; connect with power off and never plug CSI into a servo TTL port. Price is not confirmed; contact support first.

Where is the manual?

Use View User Guide below the media resources for the ten-chapter Zoowai beginner guide and bilingual PDF. The resource panel also links the maker’s assembly manual, videos, servo specification and board documentation; match the hardware revision before use.

COMMUNITY

Reviews & shares

Experiences and everyday moments from the product community.

View all reviews & shares ↗

Reviews are updating. Refresh shortly, or view all reviews in the community.

PRODUCT DATA SHEET

Product Data Sheet

Specifications and support details are based on the product’s verified source information.

Product Identity

Name
Microduck HD1910 DIY Robot Kit
Kit contents
15 HD-1910-C001 servos, Microduck printed parts, an M2 mounting screw pack, 14 bearings (11 large + 3 small), a Waveshare bus-servo adapter/debug board and a 5264-AMP2.0 servo cable.

Specifications

Servo model
HD-1910-C001, specification A/0 (2026-09-07)
Servo supply
4–8.4V; the adapter board voltage label does not permit 12V on this servo
Stall torque
12 kg·cm at 6V; not continuous rated torque
Rated load
3 kg·cm at 6V
No-load speed
0.109 s/60° at 6V (92 rpm, ±10% specification tolerance)
Stall current
1.6A at 6V per servo
Case dimensions
34 x 20 x 23 mm; see drawing for shaft and mounting dimensions
Servo weight
21±2g
Position sensing
12-bit magnetic encoder; 4096 positions; 0.088° per pulse
Communication
TTL half-duplex asynchronous serial; 38400 bps–1 Mbps, 1 Mbps default
Connector
AMP2.0-3P; use the model-specific pin definition
Waveshare adapter A
42 x 33 mm; CH343 USB serial; maximum 5A; no regulator, output equals input

Package & Support

Warranty
1 year for non-user-caused faults; other repairs chargeable; customer pays repair shipping.
Guide
Zoowai compiled beginner edition; not an original complete-robot manual.

After-sales Policy

A one-year warranty covers non-user-caused damage. For user-caused damage or repairs outside the warranty period, please contact customer service to arrange paid repairs. Shipping costs for repairs are the customer's responsibility.

FROM COMPONENTS TO CREATIONS

Finished builds

See what you can build with this component. Contact us for complete builds or custom designs.

Discuss a custom build ↗

Assembled Microduck robot

Source: AI机器人极客 / OpenMicroDuck training demo. Additional electronics are required; the demo does not imply this kit is supplied as a tuned complete robot.

Assembly guide ↗

MECHANICS / MOTION / LEARNING

A small biped, a hands-on project.

The USD400 option includes 15 HD-1910-C001 servos, Microduck printed parts, an M2 mounting screw pack, 14 bearings (11 large + 3 small), a Waveshare bus-servo adapter/debug board and a 5264-AMP2.0 servo cable. Assembly and a separate controller, camera, IMU, storage and power system are required. Individual options supply only their listed parts. The scene card shows a separated structure; this is an HD1910 DIY kit, not a Pollen Robotics complete robot. Camera reference: OpenMicroDuck uses an IMX219/CSI route. Raspberry Pi Camera Module 2 uses an 8 MP IMX219 sensor (3280 x 2464); Radxa documents this module for ZERO 3. The project BOM also lists 5 MP, conflicting with the manufacturer specification. These references do not identify the unconfirmed camera sold here. Confirm the controller, module part number, ribbon pin count/orientation/pitch and mounting before ordering; connect with power off and never plug CSI into a servo TTL port.

Microduck HD1910 DIY Robot Kit product detailMicroduck HD1910 DIY Robot Kit product detailMicroduck HD1910 DIY Robot Kit product detailMicroduck HD1910 DIY Robot Kit product detailMicroduck HD1910 DIY Robot Kit product detailMicroduck HD1910 DIY Robot Kit product detail

Style Reference Image

HD-1910-C001 · 15-servo kit reference image
Current SelectionZW-MD-HD1910-KIT-14
Price range: $5.64 through $400.00
VISA Mastercard Maestro JCB American Express Diners Club Discover