Adafruit Highlights a 3D-Printed Floating Ghost Dog Tealight Holder
Reading lead
Adafruit’s weekly #3DThursday feature showcases O3D’s “Floating Ghost Dog,” a Halloween-themed tealight holder listed on MakerWorld. The post reports a print made on a Bambu X1C using PolyMaker PLA: 110 × 94 × 74 mm, 36 g of filament, and a print time of 2 hours 18 minutes. Its stated settings are a 0.2 mm layer height, 0.4 mm nozzle, 10% infill, 1 mm retraction, and temperatures of 200°C for the nozzle and 60°C for the bed; it also lists a print speed of 230 mm/s. The article describes the weekly community showcase but does not provide independent testing, print-quality evidence, or further details about the model’s design or operation.
Article body
Every week we’ll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week:
Floating Ghost Dog By O3D makerworld.com/en/models/3323936-floating-ghost-dog-halloween-tealight-holder Bambu X1C PolyMaker PLA 2hr 18mins X:110 Y:94 Z:74mm .2mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 36g 230mm/s
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Image unavailable. Open source image ↗
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Shop for parts to build your own DIY projects http://adafru.it/3dprinting
3D Printing Projects Playlist:
3D Hangout Show Playlist:
Layer by Layer CAD Tutorials Playlist:
Timelapse Tuesday Playlist:
Connect with Noe and Pedro on Social Media:
Noe’s Twitter / Instagram: http://instagram.com/ecken
Pedro’s Twitter / Instagram: http://instagram.com/videopixil
Source: Pedro ·Adafruit Blog · 2026-10-08T13:00:50.000Z · Read the original article
Why read this
This is a relevant, concrete 3D-print example with dimensions, material, print time, and slicer settings; its value is limited to a community showcase rather than a new printer or validated performance result.
AI score 25 · View scoring rationale
Two-model scores assess source reading value, not factual accuracy. Check this editorial article against the original.
- gpt-6-luna-2026-09-22 · 28
This is a relevant, concrete 3D-print example with dimensions, material, print time, and slicer settings; its value is limited to a community showcase rather than a new printer or validated performance result.
- deepseek-flash · 22
Routine weekly 3D-printing community showcase of a Halloween tealight holder; only specific slicer settings and hardware details are new, with no independent verification or broader industry change.
Analyzed: 2026.10.10 03:25 UTC
Comments & answers 0