Adafruit Guide Builds a Pepper’s Ghost Monster Eye with Qualia ESP32-S3
Reading lead
Adafruit’s new project guide demonstrates a desktop Pepper’s Ghost effect built around its Qualia ESP32-S3 and a 2.1-inch round TFT display. The animated “Monster Eye” illusion is assembled inside the Adafruit DIY Snow Globe Kit, with a 3D-printed enclosure holding the electronics and a clear plastic reflector that builders can cut themselves. The material identifies the main components and points readers to the full guide, but does not provide details about software requirements, build time, cost, or testing. This is a reproducible maker-project example rather than a new hardware release or evidence of a broader change in product capability.
Article body
Build a desktop size Pepper’s Ghost effect using the Adafruit Qualia ESP32-S3 and a 2.1in round TFT display!
This project shows the infamous animated Monster Eye as a Pepper’s Ghost effect inside the Adafruit DIY Snow Globe Kit. The 3D printed enclosure houses all of the electronics and features a clear plastic reflector that you can cut yourself.
Learn Guide https://learn.adafruit.com/peppers-ghost-monster-eye
Qualia ESP32-S3: https://www.adafruit.com/product/5800
2.1in Round TFT: https://www.adafruit.com/product/5792
DIY Snow Globe https://www.adafruit.com/product/3722
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Image unavailable. Open source image ↗
Have you considered building a 3D project around an Feather or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!
Source: Noe Ruiz ·Adafruit Blog · 2026-10-08T14:00:38.000Z · Read the original article
Why read this
The guide offers a concrete, reusable microcontroller-and-display build for hardware makers; its scope is a single DIY project, with no reported performance testing or broader technical advance.
AI score 39 · View scoring rationale
Two-model scores assess source reading value, not factual accuracy. Check this editorial article against the original.
- gpt-6-luna-2026-09-22 · 40
The guide offers a concrete, reusable microcontroller-and-display build for hardware makers; its scope is a single DIY project, with no reported performance testing or broader technical advance.
- deepseek-flash · 38
Supplied material is a maker tutorial using an ESP32-S3 board, round TFT, and 3D-printed enclosure. It is relevant as hardware guidance, but it is a routine project guide with no new component release, benchmarks, or independent validation.
Analyzed: 2026.10.10 03:24 UTC
Comments & answers 0