3D-Printed Desk Cable Organizer Uses Rotating Snap-Latch Tubes
导读
Maker mgm86 has shared a desk-mounted cable organizer designed to keep frequently used leads accessible on the desktop. The holder is offered in configurations with three, five or seven tubes; each tube rotates 180 degrees to open or close and uses a snap latch. The body pushes onto a base, and the tubes can be removed and replaced. It attaches with double-sided adhesive tape, with the designer recommending masking tape underneath for sensitive surfaces. The post also describes a May 2026 V2 with an improved spring mechanism said to work with all filament types, and notes that the multicolor design can be printed without an AMS system. The material describes a community-shared 3D-printable design, not independently tested durability or performance.
正文
mgm86 shares:
配图暂未加载。 查看来源原图 ↗
A desk-mounted cable organizer that keeps frequently-used cables accessible on the desktop rather than lost behind the desk. Available in 3, 5, or 7-tube configurations. Tubes rotate 180° to open/close with snap-latch mechanism. Attaches via double-sided adhesive tape (designer recommends masking tape as intermediate layer for sensitive surfaces). Main body simply pushes onto base with specific alignment (low foot side faces back). Removable, replaceable tubes. Multicolor printing without AMS. V2 (May 2026) features improved spring mechanism compatible with all filament types. By mgm86
download the files on: https://makerworld.com/en/models/1400922-desk-cable-management-holder-cable-organizer
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
配图暂未加载。 查看来源原图 ↗
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Shop for parts to build your own DIY projects http://adafru.it/3dprinting
3D Printing Projects Playlist:
3D Hangout Show Playlist:
Layer by Layer CAD Tutorials Playlist:
Timelapse Tuesday Playlist:
Connect with Noe and Pedro on Social Media:
Noe’s Twitter / Instagram: http://instagram.com/ecken
Pedro’s Twitter / Instagram: http://instagram.com/videopixil
Source: Pedro ·Adafruit Blog · 2026-10-08T12:00:48.000Z · Read the original article
推荐理由
This is a concrete, printable hardware design with useful configuration and mounting details, but it is a narrow community project and its spring and compatibility claims are not independently verified.
AI评分 36 · 查看评分依据
双模型按来源原文评估阅读价值，不判断事实真伪；本站整理正文仍应与原文核对。
- gpt-6-luna-2026-09-22 · 38
This is a concrete, printable hardware design with useful configuration and mounting details, but it is a narrow community project and its spring and compatibility claims are not independently verified.
- deepseek-flash · 34
Community maker project: an open 3D-printable desk cable organizer with rotatable snap-latch tubes and a V2 spring update. Narrow scope and no independent testing keep attention moderate, but it is relevant hardware and useful for makers.
分析时间：2026.10.09 10:14 UTC
评论与解答 0